- Download the Syzmik catalogue (PDF, 26MB)
- Download the Syzmik Size Guide (PDF, 0.5MB)
Mens FR Closed Front Hooped Taped Spliced Shirt – ZW133
$179.00 inc GST
FEATURES
HRC 1 inherent protection at a light 155gsm weight, Gusset sleeve for extra protection, Concealed closed front opening with FR press stud closure for extra protection, Two chest pockets with covered FR press stud closure, FR rated mesh in the under arms and upper back to keep you cool, Two way radio and gas monitor loops on the front shoulder yoke, All Trims are FR rated, Loxy FR Tape, FR rated label that clearly shows FR rating of garment
- Catalogue and Size Guide
- Symbols Explained
- Standards and Solutions
- Product Description
- Colours & Sizes
Standards
High Visibility Standards
1906.4.2010
This standard explains the use of hi-visibility fabrics and retroreflective materials. It specifies the chromaticity levels to which fabrics need to be dyed in terms of performance and atmospheric pressures in order to comply safety standards. Natural fibre garments have a lower chromaticity level due to the nature of the fabric. However, only when a polyester garment is deemed a risk to the wearer in certain applications, should cotton or wool be worn in its place. Class F = Daytime fluorescent Class R = Retroreflective material Class RF = Retroreflective and fluorescent Class NF = High daytime visibility NON Fluorescent4602.1.2011
This standard refers to how a garment is constructed using fabrics compliant to 1906.4 above. There has to be over 0.2m2 of unbroken fluoro fabric on both the front and back of a garment in the upper torso (not including the sleeves). The fluoro must not be broken with non fluoro fabric within the 0.2m2 area on both the front and back from the top of the shoulders to the waist and MUST encircle the body up to that measurement, so no full side panels up to armpit level are permitted. This standard also explains the position of the retroreflective tapes on the garment and the width and quantity used. These tapes should not detract from the 0.2m2 measurement required. Class D = Daytime use Class N = Night time use using retroreflective material Class D/N = Day/night use4399
This standard refers to the capability of a fabric to protect skin against solar ultra violet radiation (known as UPF = ultra violet protection factor). This standard is an additional bonus to the garment rather than an essential requirement for hi-visibility standards but often specified from specific industry users.NOTE: EMBROIDERY ON HI-VISIBILITY SAFETY GARMENTS
Excessively large logos may jeopardise the classification of the garment. Embroidery on wet weather jackets may also impair the waterproofing properties of the garment. Please seek professional advice.Solutions
Heat stress is the single biggest problem affecting our customers at work
Symik Workwears solution to heat stress
Current workwear's solutions are not sufficient
Description
FEATURES
HRC 1 inherent protection at a light 155gsm weight, Gusset sleeve for extra protection, Concealed closed front opening with FR press stud closure for extra protection, Two chest pockets with covered FR press stud closure, FR rated mesh in the under arms and upper back to keep you cool, Two way radio and gas monitor loops on the front shoulder yoke, All Trims are FR rated, Loxy FR Tape, FR rated label that clearly shows FR rating of garment
Additional information
Colour | |
---|---|
Size |