Zoom
Mens Traditional Style Taped Work Pant - ZP523
Mens Traditional Style Taped Work Pant - ZP523

Mens Traditional Style Taped Work Pant – ZP523

$169.00 inc GST

FEATURES

HRC 2 inherent protection at a light 240 gsm weight, Unmatched comfort and coolness thanks to the highly breathable and soft Modatech fabric, All Reflective tape, press studs, labels, threads, buttons, mesh and any other trims on the garment are FR rated, Double layer knee for increased durability, Two side waist pockets, Two back hip pockets with flaps and FR press stud closures, FR rated mesh in the waist band to increase air flow and keep you cool, Knee darts for a modern fit, Crotch gusset for increased freedom of movement and durability, Loxy FR Tape, FR rated heat transfer label that clearly shows FR rating of garment so workers can be quickly identified as having the right level of protection.

Add to Quote
SKU: ZP523 Categories: , , , , Tags: , , , ,
Syzmik Workwear

Standards

High Visibility Standards

1906.4.2010

This standard explains the use of hi-visibility fabrics and retroreflective materials. It specifies the chromaticity levels to which fabrics need to be dyed in terms of performance and atmospheric pressures in order to comply safety standards. Natural fibre garments have a lower chromaticity level due to the nature of the fabric. However, only when a polyester garment is deemed a risk to the wearer in certain applications, should cotton or wool be worn in its place. Class F = Daytime fluorescent Class R = Retroreflective material Class RF = Retroreflective and fluorescent Class NF = High daytime visibility NON Fluorescent

4602.1.2011

This standard refers to how a garment is constructed using fabrics compliant to 1906.4 above. There has to be over 0.2m2 of unbroken fluoro fabric on both the front and back of a garment in the upper torso (not including the sleeves). The fluoro must not be broken with non fluoro fabric within the 0.2m2 area on both the front and back from the top of the shoulders to the waist and MUST encircle the body up to that measurement, so no full side panels up to armpit level are permitted. This standard also explains the position of the retroreflective tapes on the garment and the width and quantity used. These tapes should not detract from the 0.2m2 measurement required. Class D = Daytime use Class N = Night time use using retroreflective material Class D/N = Day/night use

4399

This standard refers to the capability of a fabric to protect skin against solar ultra violet radiation (known as UPF = ultra violet protection factor). This standard is an additional bonus to the garment rather than an essential requirement for hi-visibility standards but often specified from specific industry users.
NOTE: EMBROIDERY ON HI-VISIBILITY SAFETY GARMENTS
Excessively large logos may jeopardise the classification of the garment. Embroidery on wet weather jackets may also impair the waterproofing properties of the garment. Please seek professional advice.

Solutions

Heat stress is the single biggest problem affecting our customers at work

Traditional cool work wear has used lightweight cotton drill to help provide a heat stress solution. The issue with this solution is that the base garments and fabric are essentially the same as traditional workwear so there is only minimal additional cooling achieved. The other major limitation of traditional cool workwear options is the loss in strength and durability from using a lighter-weight fabric.

Symik Workwears solution to heat stress

Syzmik’s new Rugged range of work shirts and pants changes the way cool workwear is developed. The fabric we use is 100% cotton that is produced in a square weave construction, the construction is a more open weave that allows the maximum amount of air to pass through the fabric.

Current workwear's solutions are not sufficient

Heat stress is not only uncomfortable but can result in serious injury or even death in extreme cases. Under the workplace health and safety act 2011 (AS) it is the legal obligation of employers to put plans in place to mitigate the heat stress risk.

Description

FEATURES

HRC 2 inherent protection at a light 240 gsm weight, Unmatched comfort and coolness thanks to the highly breathable and soft Modatech fabric, All Reflective tape, press studs, labels, threads, buttons, mesh and any other trims on the garment are FR rated, Double layer knee for increased durability, Two side waist pockets, Two back hip pockets with flaps and FR press stud closures, FR rated mesh in the waist band to increase air flow and keep you cool, Knee darts for a modern fit, Crotch gusset for increased freedom of movement and durability, Loxy FR Tape, FR rated heat transfer label that clearly shows FR rating of garment so workers can be quickly identified as having the right level of protection.

Additional information

Colour

Size

, , , , , , , , , , , ,

Related products